How To Measure A Picture Frame Size
Framing pictures is a great way to showcase your favorite photos. Pictures are a constant reminder of past memories, events, and people you loved and lost.
With the rise of digital photography, it has become easier to take hundreds of pictures without worrying about running out of film or memory space.
However, it has become harder to organize and display them due to the lack of an obvious frame. With the old film cameras, you had a clear plastic frame where you could see all of your photos organized.
Organizing your pictures via computer is helpful for finding and showing all of your photos, but it does not look as nice as having them framed. Putting your favorite images on display is a nice way to refresh your home decor!
There are several ways to measure and frame pictures depending on the size and type of picture frame you want.
Find the height of your frame
The first step in measuring a picture frame size is to find the height of the frame. You can do this by measuring the width of the frame and doubling it, or measuring the length of the inner picture space and doubling it.
To measure the width of the frame, use a ruler to measure from edge to edge across the top or bottom of the frame. To measure the inner picture space, place a piece of paper in the frame and measure how much paper fits inside. Double this measurement to get the total frame height.
If you have a difficult time finding where the top of the frame ends and where t he backing begins, try looking for things like corners or rivets that connect them. These are good points to start and end your height measurement.
To make sure your measurement is accurate, check that it is within one inch of what the actual dimensions are according to an online resource like Home Depot’s .
Calculate the area of your frame
The first step to choosing the right picture frame size is calculating the area of the frame. You can do this by measuring the length and width of the frame.
Most frames have internal dimensions, or the length and width of what will be inside of the frame. External dimensions are the length and width of the complete frame including any embellishments.
For example, a classic white wood frame may have internal dimensions of 8” x 10”, and external dimensions of 12” x 12”. If you wanted to put a 8” x 10” photo in this frame, it would be slightly too small or too big depending on how you looked at it.
Divide the area by 24 to get the length of a inch
Once you have the width of the picture, you need to figure out the length of the picture frame. To do this, you need to divide the picture width by 24. This is how many inches wide a frame needs to be to hold your picture.
For example, if your picture is 8 inches wide, you need to get a frame that is 8/24=2” wide to hold your picture. This is because an inch is 24ths of a foot, and the frame needs to be 2 feet wide.
Some people use 25 as their divisor instead of 24, but it ends up being the same size frame! It just looks slightly bigger or smaller depending on what number you use.
Use a ruler to measure the length of a inch
Once you have your measurement, you can determine the size frame you need. Most frames are available in several sizes, so you should not have a hard time finding one.
Frames are usually sized by width by length, either by inches or centimeters. Sizes can also be given as a proportion, like small, medium, and large.
Once you have determined the size of the frame you need, make sure it is the correct direction! You do not want to put in the frame backwards, that would be very confusing.
Then lay down your picture and start securing it. Make sure all of the edges are tucked in properly to keep it from getting damaged. You can use tape or glues to ensure this.
Use a calculator to find the square root of the dimension
Once you have the length and width of your frame, you will need to find the depth or thickness of the frame. To do this, you will need to find the square root of the frame size by multiplying the length and width and then dividing that number by two.
For example, if you have a frame that is 100 x 100 mm square, then the thickness would be 100 x 100 / 2 which would be 50 mm. If your frame is rectangular with a shape such as an octagon or a circle, then use the average of the length and width to find the square root.
Once you have these numbers, write them down so that you do not mistake them for another.
Multiply each dimension by 4 to find the area
Now that you know how to find the size of a picture frame, let’s talk about how to measure a frame size. Once you know the dimensions of the picture, you will need to find the dimensions of the frame.
To do this, you will need to multiply each dimension of the picture by four. This is because one side of the frame is made up of four sides of the picture.
The width of the frame is equal to the width of the picture times four, or area x 4. The height of the frame is equal to the height ofthepicturetimesfour,orarea x 4. The depth oftheframeisarea x4.
Divide the area by 324 to get the length of a inch
Now that you have the width of your picture, you need to get the size of the frame. Most pictures are framed in a 8×10 or 5×7 size. These sizes are the width of the frame divided by eight inches.
If you have a portrait or big landscape picture, then you will need to get a larger frame. A good rule of thumb is to get a frame that is two inches bigger all around than the picture size. This is because there is some inside spacing needed for the picture to rest on.
Use a ruler to measure the length of a inch
Once you have the width of the picture frame, you will need to measure the length of the picture. You will need to measure the length of the picture including the size of the frame.
Most pictures are made in a standard size. These include squares and circles, which have a set diameter, and vertical pictures, which have a set height. You can find these sizes at art supply stores or online.
Once you have measured your picture, add about an inch to each side for the frame. This is because the frame will be slightly wider on each side to hold it in place. If your frame is plastic or metal, then it might not need this addition due to its rigid shape.